Best Smooth On Oomoo

Features

• Easy-To-Use Tin Cure Silicones formulated for mold-making for art-related projects & industrial applications.
• OOMOO 30 silicones do not have great tear strength & are suitable for making one to two-piece block molds, ideal for novice mold makers.
• For variety of art-related & industrial applications such as sculpture & prototype reproduction, casting plaster, resins, wax, & more!
• Mix Ratio=1A:1B by Volume | No Scale & Vacuum Degassing Required | Cures in 6 hours.
• Although not usually necessary, use Ease Release 200 for easier demolding when pouring into or over most surfaces.
• Perform a small-scale test & follow technical bulletin instructions at www. smooth-on.com.

Features

• Easy to use 1:1 by volume ratio . No scale required.
• Oomoo 25 - Fast setting 75 minute cure time. For quick turnover of molds. Sets FASTER than Oomoo 30.
• Cast with smooth-cast, plaster or resin! Also Popular for use with Pros-Aide transfers!
• Great for craft moldmaking, candles, replicas, home remodeling, jewelry, and more!
• East to use, equal parts A and B. Degassing is not necessary. Cures at room temperature.

Features

Features

• Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage
• Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, and other materials
• Easy to use platinum silicone mold mix
• Cures to a soft, stong, tear resistant rubber

Features

• Rebound 40 Brush On Silicone captures perfect detail
• Less Waste of materials!
• 2 Pint Kit goes a long way
• For vertical surfaces
• 15+ year library life of cured silicone

Features

• Easy to use platinum silicone mold mix
• Cure to soft, strong, tear resistant rubbers
• Good for casting wax, gypsum, resins, concrete and more
• Pot life of 50 minutes and cure time of 4 hours
• Mix ratio is 1A:1B by volume- no weighing scale necessary

Features

• Smooth-On Ecoflex 00-35 FAST - 2 Pint Kit - Net Weight 2.0 Lbs

Features

• Easy-to-Use, Self-thickening, liquid silicone rubber for making brush-on molds of almost any model
• Soft, flexible, holds vertical surfaces - great for models with undercuts to reproduce sculpture, architecture, etc.
• Mix ratio = 1A:1B by volume | Potlife = 20 minutes | Cures in 6 hours | Heat Resistant up to 450°F/232°C.
• Minimal Surface Prep Required - Seal porous models before applying – incompatible with Sulfur
• Follow technical bulletin instructions on the Smooth-on website

Features

• Easy way to get started learning how to make molds and castings
• Designed for use with small FLAT or 2-Dimensional original models
• Comes with: Trial Kit OOMOO tin-cure Molding Rubber, Trial Kit Smooth-Cast 300 Casting Resin, 2 oz. Superseal, Ease Release 205 Release Agent, How-To Booklet, How-To DVD, Quick Start Guide
• Will teach you step-by-step how to make a pourable mold and casting

Features

• Extra Resistance to curing inhibition - Defiant 25 can resist sulfur poisoning due to UV Resin much better than common platinum silicone. With just 30 minutes of curing the printed part submerged in water, Defiant 25 can cure without issues. No coating is needed. Defiant silicone clear mold works best with our Fast, Build, Blu, Easy, and Sculpt resins.
• Strong and Durable - Compared with others, Siraya Tech Defiant 25 clear silicone mold making has better flexibility and stronger tear resistance, and silicone molds have a longer life span and can be reused many times. More pulls per mold mean lower cost per cast. This silicone rubber can resist temperatures up to 200C.
• Thin Viscosity - Defiant 25 is Easy to pour and degas compared to other 25A silicone. It is thinner and thus making the entire process simpler even for beginners. You do not need an expensive professional vacuum chamber to remove bubbles and with a good pouring technique, you can get a bubble-free cure.
• Versatile & Food Safe - Defiant 25 from Siraya Tech, a food-safe platinum silicone, excels in both food and craft applications. Perfect for molds of candy, chocolate, cake, and ice, it also suits resin, wax, candle, and soap molds, casting, architectural detailing, and figure making. Its balanced hardness and flexibility make it ideal for diverse molding tasks and DIY projects.
• Easy Mixing Ratio 1A:1B - Defiant 25 mold making silicone rubber is easy to mix, mixing ratio of 1:1, self-degassing, and very easy to use. This liquid silicone mold can be easily used by beginners without any experience. Please feel free to contact us if there's any issue.