Best Scope Mount For Ar15

Features

• Dual ring scope mount available for both standard 1 inch and standard 30mm tube rifle scopes
• Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
• Mounts to any flat top Picatinny rail equipped rifle
• 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
• 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

Features

• All new rigid unibody design with strategically placed lightening cuts to reduce weight
• A lightweight 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25% lighter than our previous generation Slim Profile Series scope mounts
• Available in 3 different mount configurations allowing for optimum placement of your optic: Inline Rings, 1 Inch Offset Cantilever Rings, and 2 inch Offset Cantilever Rings. Available in 1 inch, 30 mm, and 34 mm diameter configurations.
• Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
• All Monstrum products are backed by a lifetime guarantee

Features

• 1 Inch Scope Mount: CVLIFE 1" scope mount is suitable for scopes with a diameter of 1", the spacing between the rings is 2.36", the center to base height is 1.57", base length is 3".
• Hold Well Zero: Two screws on each side of the ring provide a recoil-resistant grip to your scope, with great alignment between the front and rear rings. It has four fastening recoil lugs for tight mounting on the picatinny rail, which can hold your optic very securely.
• Offset Cantilever Mount: Scope mount features a 2.4" forward extension, which can provide better head placement flexibly and find proper and correct eye relief, increasing comfort and reducing fatigue, which is important for all-day use.
• Lightweight Material: This offset dual ring scope mount is made of 6061 aviation aluminum material and weighs only 5.8 oz, which doesn’t add much extra weight to you.
• Torx Screws: Strong torx screws allow for precise tightening and reduce stripping. Comes with spare 4 torx screws, which can be replaced at any time, increasing durability and service life.

• Sturdy 1'' scope ring mount for Picatinny/ Weaver Rail (21 mm).
• Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
• Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• The ring is for most scopes which are in 1''/ 25.4 mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'')
• With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20 mm rail easily.

Features

• These Vortex Hunter Rings position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base.
• Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups. Do not recommend the Hunter Rings for use on heavy recoiling rifles.
• Made from aircraft-grade 6061-T6 aluminum for optimum strength. Torque Specs: Base Clamp Screws-25-30 in/lbs, Ring Screws-15 in/lbs.
• Sold two rings per package.
• Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage or cosmetic damage that doesn't hinder performance.

Features

• The ARKEN OPTICS Rigid Precision ultralight mount is fully CNC machined from aircraft grade Aluminum resulting in the highest precision and tolerances possible.
• The Rigid Precision scope mount features a cantilever style mount with 2.5 Inches of forward extension for better eye relief.
• 20 MOA Built in Elevation,Fit MIL-STD picatinny rails.
• The optic manufacturer's specification shall always supersede Arken's Rigid Precision mount specification, unless higher.

Features

• Next generation of Monstrum Scope Mounts with a new ultra-lightweight design, sleeker more aggressive machining, and more mounting options
• Lightweight design, evolved over several generations of Monstrum scope mount products, brings the weight down to a mere 3.7 ounces for the inline version to 3.9 ounces for the long offset version- 25% lighter than our previous generation Slim Profile Series scope mounts
• The Razorclaw is offered in 3 different mount configurations allowing for optimum placement of your optic: Inline Rings, Short Forward Offset Rings, and Long Forward Forward Offset Rings. Available for both 1 inch and 30 mm diameter rifle scope tubes.
• Mounts to any flat top Picatinny equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatinny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil
• All Monstrum products are backed by a lifetime guarantee

Features

• Fits 20mm Picatinny Weaver rails
• Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube scopes.
• Built in Weaver style rails - very handy fitting flashlights and lasers etc.
• Front Lens Size: Up to 56mm - This figure describes the maximum size of the objective (front) lens.
• Scope Mount with Qick Detach Locks for Picatinny Weaver Rail

Features

• Mounting rings are pushed forward 2" for better eye relief
• Designed for mil-spec upper receivers with 1913 Picatinny rail
• 6061 T6 extruded aluminum construction
• MIL-A-Type 3 black hard-coat anodize
• Ridged and lightweight; Made in the USA

Features

• Fits 20mm Picatinny Weaver rails
• Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings
• Heavy duty - Scope Mount Weight about 8.38oz
• Mount provides 2" of forward scope positioning on the .223 flat top platform
• Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for mounting additional accessories