If you have been searching for the best Ps4 Controller Joystick Sensor, you probably have noticed that not all models have the same specifications, some can adapt better than others to different tasks. To help you choose the product you need, we have gathered 10 of the best Ps4 Controller Joystick Sensor from different categories on the market.
Best Ps4 Controller Joystick Sensor
Image
Product Title
Rating
1
Onyehn 20pcs Replacement Trimmer Potentiometer Sensor for Xbox One,PS3,PS4 Switch Pro Controllers,Gasket Repair Parts for Thumb Stick Analog Joystick
9.5
Amazon.com
2
EEEKit 20pcs Replacement Trimmer Potentiometer Sensor for PS4 Controllers, 10k Ohm Trim-Pot Gasket Repair Parts for Xbox One PS3 PS4 Switch Pro Thumb Stick...
9.3
Amazon.com
3
TOMSIN Joysticks Replacement for PS4 Controller,4 Pack Hall Effect 3D Analog Sensor Joysticks Module for PlayStation 4 Controller
8.8
Amazon.com
4
iParto 10 Pack 2K3 Ohm Potentiometer Replacement for Sony PlayStation 5 PS5 Dualsense / PS4 DualShock Controller Trim Pot Resistor Thumbstick Module Sensor...
8.7
Amazon.com
5
3D Analog Joystick Replacement for PS4/PS5 Controller - Hall Effect Sensor, Never Drift, Precise Control, Power Saving - Set of 4
7.7
Amazon.com
6
12Pcs Trimmer Potentiometer Sensor Replacement for Xbox One,PS3,PS4 Switch Pro Controllers,Trim Pot Resistors Repair Parts for Thumb Stick Analog Joystick
7.4
Amazon.com
7
Ambertown 2 x Analog 3D Joystick Thumbstick Controller Rocker for PS4 Controller Replacement
7.2
Amazon.com
8
ElecGear 4X Replacement Joystick (EL2 FU 10K) + 4X Drift Fix PCB for PS4 / PS3 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module...
7
Amazon.com
9
Dliaonew Wireless Controller for PS4, 2 Pack Remote Control Compatible with PS-4/Slim/Pro with Dual Vibration/Audio/Six-axis Motion Sensor/Game Joystick -...
6.8
Amazon.com
10
JAO Automation Premium Quality Joysticks Analog Sticks compatible with Xbox One, X, S, Elite, PS4, Switch Pro controllers w/ 10k pots (not for 360 or PS3)...
6.5
Amazon.com
More Details
Amazon.com
Features
| Part Number | LA153 |
| Model | LA153 |
| Warranty | N |
- NOTE:Please test whether the new potentiometer patch has a resistance value before replacing it. If there is no resistance, the white part needs to be removed and installed upside down, and then the resistance needs to be tested. Refer to Figure 2 on the left and install the white parts in two directions. Then test the resistance. If there is no resistance after testing in both directions, it indicates that the potentiometer is damaged. Please contact us.
- It is normal for the received patch to fall out and can be installed by yourself.
- Required Ability:Needs moderate soldering. Instruction is not included, but it is not complicated.
- How to use:Take out the board separately, pry open the potentiometer on the side of the joystick, and replace it with a new one. Fixes Stick drift, blind spots, creeping, stuttering, dead zones, non centered joysticks.
- Package included:20*modules for games controller joystick
Amazon.com
Features
| Part Number | E354670-E003762458FBA |
| Color | Green |
| Size | 4.5x4.5x2cm |
- Compatibility: Replacement potentiometer sensors are compatible with Xbox One, PS3, PS4, and Switch Pro, restoring accurate and responsive control for gaming enthusiasts
- Repair Broken Parts: The trim potentiometer sensor solves the problems of creep, jams, blind spots, dead spots, and dead zones. It's perfect potentiometer replacement for your Switch controller
- High-Quality Material: Made of high-quality ABS and metal material, durable and practical, working exactly like the original controller potentiometer
- Easy to Repair: Simply take out the board and open the potentiometer of the joystick, then replace it, you can easily do the repair yourself
- Package Includes: 20 x trimmer potentiometer sensor replacement. The resistance value is 10k ohms, please make sure of this value before ordering
Amazon.com
Features
| Part Number | P4-Hall-Joysticks |
| Model | P4-Hall-Joysticks |
- Needs moderate soldering.Professional installation is highly recommended, instruction and soldering tools are not included
- Compatible with PS4 controller,not for other brand or other modle controller
- Hall electromagnetic rocker is made of high-quality wear-resistant materials and hall sensors,more accuracy,stability,and reliability,fix drifting,broken and loosen joysticks
- Come with 4 x Hall Effect 3D Analog Module,4 x Joysticks Caps and open tools
- Hands skill required,watch installation videos on Youtube will be helpful,Any question please feel free to contact us via Amazon Email System and we will do our best to solve it
Amazon.com
Features
| Warranty | 2 year manufacturer |
| Color | 10 Pack |
- 【Highest Quality】Brand New and Highest Quality, inspected before packaging to ensure that the parts you receive are in good condition.
- 【Compatible model】Compatible with Sony Playstation 5 PS5 Dualsense / PS4 DualShock Controller.
- 【Attentions】Soldering is required for this installation,and the installation manual is NOT including in the package.Please searching on Youtube and follow the video step by step.
- 【What you Get】10 x Potentiometers, 1 x 4.5 inch screwdriver (Phillips #000), 1 x Metal Tweezers, 1 x Spudger, 1 x Nylon Pry Tool, 1 x Metal Triangle Opening Tool, 1 x iParto Microfiber Cleaning Cloth.
- 【Package】The potentiometers come with a strong outer casing, ensuring that the product will not sustain any damage during transit.
Amazon.com
Features
| Model | G3646 |
| Color | Green |
- Just one screwdriver for calibration (included in the supply)
- Chip inside, contactless structure, precise control，Compatible with PS4/PS5 controllers , the comfort of using it feels like the original，providing a seamless gaming experience
- 360° control，Higher Sensitivity Hall Effect Sensor Joystick, which fundamentally solves the problem of joystick drift. PS4/PS5 Joystick also can solve worn, out of control and insensitive analog joystick.
- Joystick replacement the power is 50% lower than the original carbon film joystick, more power saving, you can get longer game time.
- Joystick using high quality metal and plastic, sturdy and durable, which can perfectly replace old or broken joysticks. A set of four to ensure that you always have a spare joystick
Amazon.com
Features
| Part Number | E1243 |
- Useful:The 3Pin trimmer potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone or wouldn't center after years of wear and tear.Soldering the unit with only 3 prongs will be much more easier than replacing the 14Pin joystick assembly.
- Used for:The trim pot resistor is OEM repair parts, the same model as the one in your controller. The genuine replacement sensor is to ensure accuracy and prolong lifespan. replacement for the wireless controllers below: PS3; PS4 DualShock4 series (PS4, PS4 Slim, PS4 Pro); Xbox One series (Xbox One, One S, One X and Elite); Nintendo Switch Pro controller.
- Note:Make sure you have basic soldering skills and some soldering supplies like an electronics solder iron and small gauge solder. Use a pair of pliers to separate the problem sensor off the thumbstick component. A metal pick helps to clear the holes in the PCB. Re-soldering the new unit in is a breeze. Just remember to use flux and keep the iron's tip well tinned.
- Package include: 12Pcs potentiometer sensor modules for games controller joystick.
Amazon.com
Features
| Is Adult Product |
- Brand New , High Quality.
- Platform: PS4 .
- for PS4 Analog 3D Joystick Thumbstick
- Package Includes: 2 x 3D Joysticks .
- This 3D Analog Sensor Module is used for fixing your controller.
Amazon.com
Features
| Part Number | EL2-FU-10K |
| Model | EL2-FU-10K |
| Color | EL2 FU 10K for PS4 / PS3 |
| Is Adult Product | |
| Size | EL2 FU 10K for PS4 / PS3 |
- [EL2 FU 10K for PS4/PS3 Controller] – 4x replacement analog joystick was found in some PS4 DualShock 4 came with PlayStation 4 Pro, and some PS3 controllers also use this version. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10KΩ trimmer potentiometers in orange
- [Compatibility] – The 14 prongs were positioned as the same as ALPS edition. Technically, the whole unit is interchangeable with EL1 ALPS 10K used in PS4 controllers, and other brands like ‘Scuf’ and ‘Razer Raiju Ultimate’ with ALPS joysticks inside. However, the trim pot resistor alone is not interchangeable with ALPS edition
- [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting
- [When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan
- [Reminder of DIY] – With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. We suggest replacing the potentiometers first to solve most of the joystick problems. To desolder the entire joystick module off PCB by a normal soldering iron, please take a look at the desoldering kit at product ID: B0BK7169M8
Amazon.com
Features
| Part Number | DL07-7 |
| Model | DL07-7 |
| Color | Camo Blue + Camo Grey |
| Size | Ergonomics |
- 【SUPER COMPATIBILITY】This wireless camouflage controller set is widely compatible with P-4/P-3/ Pro/Slim/Computer/Android OS/iPhone/iPad, you can enjoy various games in multiple platforms with gamepad, the perfect gift for game lovers!
- 【PRECISION CONTROL】The wireless p4 controller built-in high-sensitivity accelerometer and gyroscopes detect motion, tilt and rotation of the wireless joystick. The trigger buttons and analog joystick are highly sensitive, with almost no drift and delay in all operations.
- 【2 PACK WIRELESS CONTROLLER SET】Support dual vibration, touch pad, acceleration/gravity sensor, LED light bar, 3.5mm headphone jack, speaker, share button functions. Controller with 4 Joysticks Pad Covers.
- 【DOUBLE SHOCK FEEDBACK】The 2 pack controller has built-in dual vibration motors, which can provide different intensities of vibration feedback according to different collisions in the game, Immerses the player in the best gaming experience!
- 【LONGER PLAY TIME】This controller uses a 1000mAh rechargeable battery, which can provide up to 12 hours of uninterrupted gaming time, Total of 24 hours of play with 2 controllers. The controller takes only 2 hours to charge quickly.（With 2 charging cables）
- 【OUR SERVICE】Our aim is to provide every customer with high-quality controllers ps-4 and services. If there is any quality problem with your 2 controllers , please contact us to exchange. We will wholeheartedly provide you with the most complete after-sales service.
Amazon.com
Features
| Model | REV1.0 |
- Unparalled quality control - EVERY unit is tested for +/- 4% center rest and all 8 quadrant extent limits. We are the only joystick manufacturer to publish real tolerances and we test every single joystick.
- Proprietary engineering for longevity and accuracy. Designed from the ground up to maintain exceptional performance longer.
- Quality controlled to ensure smooth motion, a graduated stick force profile and crisp toggle switch press.
- Our staff have been using these joystick in their own controllers for years now and most are still in perfect condition after nearly 5 years of daily use.
- Our second generation joysticks are now available with even higher precision tolerances under ASIN B0D5MBG9TW
