If you have been searching for the best Motorcycle Strobe Brake Lights, you probably have noticed that not all models have the same specifications, some can adapt better than others to different tasks. To help you choose the product you need, we have gathered 10 of the best Motorcycle Strobe Brake Lights from different categories on the market.
Best Motorcycle Strobe Brake Lights
Image
Product Title
Rating
Our system have put together a list of options that will meet the needs of different types of buyers, so whether it’s price performance or its particular use, we have got you covered for more information on the products we have included links in the list down below which are updated for the best prices.
More Details
Features
| Part Number |
iFunyLED-Light Strip-A004 |
| Color |
Red & Amber |
- Compatibility: Suitable for most 12V motorcycles. Note: some models require a load resistor or flasher relay when replacing turn signal Light.
- High Quality: Our product features an aluminum alloy casing that is wear-resistant, shock-resistant, and easy to dissipate heat
- IP67 Protection: Waterproof and dustproof, unaffected by harsh weather conditions, and extends the lifespan of the LED
- Easy to Install: Black Wire is Negative, Yellow Wire is Turn Signal Light, Red Wire is Brake Light. Notice: When the Turn Signal is on, the Brake Light will turn off; When the Turn Signal is Turned off, the Brake Light will Returns to its birghtness
- Professional Service: We are committed to providing good customer experience, if you have any questions about our product, please do not hesitate to contact us
Features
| Part Number |
iBrightstar-1157-3014 3030-54 3F |
| Model |
iBrightstar-1157-3014 3030-54 3F |
| Color |
Brilliant Red(Tripple Flash) |
| Size |
1157 |
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb, Working Voltage: 9v-30v
- Fits: 1157 BAY15D 1016 1034 1157 2057 2357 2397 3496 7528 p21/5w etc. Easy installation, plug and play.
- Application: Flashing Strobe Blinking brake LED light bulbs will fast flashes 3 times at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision.
- Advantage: Non-polarity design, 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output, aircraft grade aluminum heat sink with Low temperature, built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Features
| Part Number |
SSNNUU-GS-100A light-2403-NEW |
| Model |
car accessories |
| Warranty |
Warranty within 6 months |
| Color |
Black |
- 【Buyer's Guide】:This brake light flasher with working voltage DC working voltage: 6V-30V measures about 1.97*1.11*0.54 inch with 5.9inch color coded pre-wiring and M adhesive, more convenient for your installation. Not only prevent tailgating alerones para auto, but also provide more cool visual effect for your LED brake light or taillight, instantly improve driving safety index.
- 【application】The safety,and styling flexibility offered by the blinking brake lights controller is unparalleled. Change the blinking brake lights frequency: flash four times fast, four times slow and then turn to constant light. Give drivers around you a striking warning, effectively prevent car rear-end occurrence, is definitely an economical insurance policy.
- 【Hassle-free installation】LED brake lights do not need to change the wiring of the rear tail light assembly, directly in series can be used. The red wire indicates the positive pole, connect the positive pole, the black wire indicates the negative pole, connect the negative pole; IN is the input to connect your car power, OUT is the output to connect the LED light end.
- 【Ultimate Durability】The biggest factor that affects the life of rear lights controller is the harsh environment. We use all industrial grade components in this LED Strobe Flash Module Controller, which is sealed to IP65 waterproof and has short circuit auto protection, overload auto protection, so it's definitely worth the money!
- 【universal strobe lights for cars】Blinking brake lights are suitable for all motor vehicles on the market, such as cars, motorcycles, trucks, SUVs, electric bikes, vans, etc. LED light blinking control, you can apply it to, brake lights or tail lights to play a role in warning the tail car, the best application is in LED high brake lights.
1 used from $8.99
Free shipping
Features
| Part Number |
2PACK-100A |
| Model |
GS-100A |
| Color |
Black |
| Size |
2PACK |
- Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,FXC flasher can solve this shortcoming very well.
- This small block controller enhance your brake light function with fast-blinking 4 times ,slow-blinking 4 times, When flashing is completed, stay in the original steady light, This warns your following drivers with a catchy blinking light.
- Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best installed in the third brake lights.
- Complete sealed technology make it waterproof, short circuit prection.
- Easy to install and durable.With our strict quality control system, we test each item and 100% ensure in good condition before we ship.Enjoy 1 year quality warranty under regular use. Offering customer technical service, feel free contact us for technical, installation and use question.
Features
| Part Number |
Frienda-light flasher-90 |
| Color |
black |
- What you can receive: there are 2 pieces of flash strobe controllers and 2 pieces of double sided adhesive tapes in the package, which can alert the vehicles behind you to stop to avoid rear-end accidents when driving blocked roads; Sending them to your friends and family members is also a good option
- 2 Flash speeds: when braking, this brake light flash module can first fast-blink 4 times and then slow-blink 4 times, and finally stay in the original steady light when flashing is completed, which can warn your following drivers when you stop with a catchy blinking light
- Serviceable material: the car flasher modules are made of quality ABS material, sturdy and reliable to use, not easy to wear or tear, can be kept and applied for a long time; They also adopt complete sealed technology, which can protect modules from water and avoid short circuit, giving you a satisfactory using experience
- Simple installation: the flash module measures about 4.8 x 2.7 x 1.4 cm/ 1.89 x 1.06 x 0.55 inches, 15 cm/ 5.9 inches in wire length, and comes with double sided adhesive tapes for easy installation; You only need to connect red wire to positive pole, and black wire to negative pole, very easy and convenient, and it's suggested to install it in the third brake light
- Wide Range of Applications: these car brake light flashers can enhance your brake light function, are necessary assistants in your daily life, can be widely applied to all types of cars' brake lights with 12 to 30 V, such as cars, trucks, motorcycles and more
Features
| Part Number |
iBrightstar-module-strobe-2A |
| Color |
Black |
- This small block controller can enhance your brake light function with 4 times fast-blinking and 4 times slow-blinking and then turn stable solid light. Improve traffic safety warning, to avoid rear-end accident.
- Working Voltage: 9-30V, will suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED Lighting Accessories Bulbs.
- Complete sealed technology make it waterproof, short circuit prection.
- Easy to install. There are input and output, Black wire for Negative Pole, Red wire for Positive Pole. High quality and strictly controlled system for durable and highly performed use.
- Buy with confidence, any other problem please feel free to contact us, we are always here to satisfy of you.
Features
- Improve Traffic Safety: When braking, first fast-blink 4 times and then slow-blink 4 times, and finally stay in the original steady light when flashing is completed which can alert the vehicles behind you to stop to avoid rear-end accidents when driving blocked roads.
- Features: Continued brakes produce visual fatigue, this flasher can solve this shortcoming very well, which can warn your following drivers when you stop with a catchy blinking light. It's useful for avoiding rear-end accident.
- Serviceable Material: The car flasher modules are made of quality ABS eco-friendly and durable material, good waterproof, durable. Black wire-negative pole and red wire-positive pole, Double side tape is included.
- Easy Installation: You only need to connect red wire to positive pole, and black wire to negative pole, it is easy to install and disassemble. Size 1.89 x 1.06 x 0.55 inches, wire length 5.9 inches, mini and compact design and space-saving.
- Package Included: You can receive 2 pieces of flash strobe controllers and 2 pieces of double sided adhesive tapes in the package. If you have any questions about the led flasher module, please feel free to contact us. We will reply you as soon as possible, provide you with a satisfactory solution.
2 new from $17.99
Free shipping
Features
| Part Number |
STR-2835-1157-39R-Red |
| Model |
Alla-STR-2835-1157-39R-Red |
| Color |
Pure Red |
| Size |
BAY15D 1157 7528 |
- (Set of 2 BAY15D base 7528/1157 Flashing LED bulbs) Double contact BAY15D 1157 Flashing LED brake light bulbs will strobe at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs rear-end collision.
- LED Chips: 39 pieces high quality,high power with high performance 2835 led chips per 7528/1157 LED strobe brake lights bulbs---360 degree full angle illumination with projector lens design
- Dual filament BAY15D base S8 shape LED strobe bulbs. Used for replacing rear brake stop light, center high mount stop ( 3rd brake ) light, rear turn signal light, etc.Extra load resistors maybe required to avoid the error code or blinking issue.
- The length is about 1.9 inch. Cross reference number: 1016, 1034, 1157, 1606, 1662, 2057, 2357, 2397, 3496, 7528, 1034, 1035, 198, 7528L, 94, 1076, BAY15D, 1157LL, 2357LL, 2057LL, 198LL, P21/5W, 7537, and 1154,etc
- One Year Warranty, Color: Brilliant pure red. Voltage: 12V - 24V,built in stable current IC driver for longer lifespan.
Features
| Part Number |
EBF-1157-BT |
| Color |
1157 Strobe |
- Pack of 2-pc 1157 LED bulbs, 12V, 3030-SMD high brightness chipset, 28-LEDs per bulb, brilliant red color, 360 degree full angle illumination,long lifespan up to 50,000 hours, size: 0.75 inch in width, and 1.5 inch in length
- Bulbs will strobe at braking mode, so that people could notice your car easily and keep safe distance to avoid any automotive cars, trucks, SUVs getting rear-end collision
- Could fit bulb size: BAY15D 1016 1034 1157 1606 1662 2057 2357 2397 3496 7528 1034 1035 198 7528L 94 1076 1157LL 2357LL 2057LL 198LL P21/5W 7537 and 1154 etc. could fit your vehicle brake light. as long as your bulb size as above reference bulb size
- Directly replacement, just plug and play, no other parts or modifications needed and no error message warning on dashboard for 99% vehicle, no mercury, UV, IR or other deleterious radiation
- Buy with confidence, if you have any product or installation issue, please feel free to contact us, we will try to help you out within 24 hours
Features
| Part Number |
XP-FW60 |
| Model |
10 |
| Color |
Black |
| Size |
FastFlash 60w |
- «RAPID FLASH» Avoid accident, Safety warning light, 50X bright flashing Speed to call attention.
- «TOP-NOTCH ACCESSORY» Enhance brake lights to 3 pattern sequence RAPID, SLOW & SOLID FLASH.
- «ADD STYLE TO YOUR RIDES» Elevate the look of your car truck or motorcycle, Make It stand out!
- «SECURITY IS OUR PRIORITY» Waterproof design to avoid short circuit, Led & any other bulb - friendly
- «EASY Kit + 3M adhesive tape **PROFESSIONAL INSTALLATION REQUIRED* NOTE: Any voltage leakage will affect the operation» Instruction kit operation, example: if voltage is less than 12v then the unit wont flash properly. Please contact our support team on any problem and we will work it out with you. PROFESSIONAL INSTALLER IS REQUIRED. NOTE: Any voltage leakage will affect the unit operation, example: if voltage is less than 12v then the unit wont flash properly. Please contact our support team
