Best Headphone Jack Removal

Features

• ️Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks.
• ️Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
• ️Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough.
• ️Tep: This set of headphone jack remover tool is considered a single-use tool.
• ️If you have any question, please feel free to contact us by email.

Features

Features

• ✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.
• ✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.
• ✔️Dear customers, the breakage of each earphone plug is different. We can't guarantee that this tool is suitable for all cases. Before you use this tool, please read the instructions carefully. Because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug it in deep enough because the headphone hole is 0.55 inch deep. Then squeeze the end of the metal tube and pull it out.

Features

• ✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.
• ✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.
• ✔️USE WITH CAUTION: Inserting too far may damage the device. The pointed end of the tube is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool.
• ✔️GIFT: The headphone jack cleaning brush in the package is a gift.

Features

• NO GUARANTEES: This tool comes with no guarantees implied or expressed and should be considered a single-use tool.
• PURPOSE: GripperX is designed for the purpose of extracting a headphone plug that has broken apart, leaving the tip of the plug lodged inside the headphone jack of a mobile device.
• HEADPHONE JACKS: Designed to be used on 3.5mm jacks found on phones, laptops and smaller devices.
• HOW TO USE: Insert GripperX between headphone jack housing and broken plug. You may need to lightly tap it in. It should go in about the same length of the headphone plug. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove. Restore functionality to your device's headphone jack.
• USE WITH CAUTION: Rotating or inserting too far may damage the device. The opening is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool.

Features

• Applicable To :all models of mobile phones, pads and computers headphone jack, is built to easily remove broken 3.5mm headphone plugs from jacks.
• Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
• Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug it in deep enough.
• Tep: This set of headphone jack remover tool is considered a single-use tool.

Features

• PURPOSE:For all 3.5mm models of mobile phones, pads and computers headphone jack,headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.
• HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove（It is recommended that you use pliers to help）
• Dear customers, the breakage of each earphone plug is different. We can't guarantee that this tool is suitable for all cases. Before you use this tool, please read the instructions carefully. Because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug it in deep enough because the headphone hole is 0.55 inch deep. Then squeeze the end of the metal tube and pull it out.
• If you have any question, please feel free to contact us by email.

Features

• Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks.
• Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
• Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough.
• Tep: This set of headphone jack remover tool is considered a single-use tool.
• If you have any question, please feel free to contact us by email.

Features

• 【Applicable To】all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks.
• ✔️【20-Second Extraction Tool】With this headphone jack extraction tool you can easily remove a damaged headphone plug in just 20 seconds. This headphone plug extraction tool saves you the need to go to a professional repair shop and saves at least $20 .
• ✔️【How To Use】 Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
• ✔️【We Promise】 This set of headphone removal tool is considered a SINGLE-USE tool. But we offer a 100% satisfaction guarantee. If you are not satisfied with our tool kit, please take a picture and contact us.
• ✔️【Comes With Small Gift】The Sim Card Tray Pin and 2pcs finger cots in the package is a gift for your. It is portable.Hope you like it!

• HEADPHONE PLUG EXTRACTION TOOL: Work for all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks.
• 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. At least 20 bucks will be saved.
• HEADPHONE TIP REMOVAL TOOL: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
• BEFORE YOU USE THIS TOOL: Please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough.
• GUARANTEES: This set of headphone removal tool is considered a SINGLE-USE tool. But we offer a 100% satisfaction guarantee. If you are not satisfied with our tool kit,