If you have been searching for the best Cac Card Holder, you probably have noticed that not all models have the same specifications, some can adapt better than others to different tasks. To help you choose the product you need, we have gathered 10 of the best Cac Card Holder from different categories on the market. And most significant is that, in picking these items, we have thought about many components like price, quality, durability, performance, reviews, and more so you can not turn out badly with your item buy.
Best Cac Card Holder
- 2-Card Holder: Inner size: 3.5" L x 2.3" W. Accommodate 2 standard credit cards of 3-3/8 by 2-1/8 inches. Ideal for IDs, driver’s licenses, badges, passes, etc. DO NOT FIT THICKER CARDS!
- Quick Access: Practical thumb slot allows you to slide card in/out effortlessly with just one finger. Handy top-load design keeps card tightly in place to stop it from falling out.
- Heavy Duty: Sturdy polycarbonate case is resistant to heat, wear or breaking. Stainless steel badge reel endures 100,000 pulls. And its retractable nylon cord allows for smooth extension up to 24 inches.
- Crystal Clear: Well-built for maximal transparency which presents you with super clear visual effect. Easy to read or scan your cards without removing the lanyard or case.
- Easy to Carry: Come with a removable carabiner and a durable belt clip. Easily carry around your items by securing them onto your pocket, belt loop, backpack or zipper.
- FIPS 201 Approved Products List (APL)
- This Badge Holder can hold two cards.
- Blocks RFID Chips in cards from being read without permission.
- Physically protects card, weather and water resistant.
- Made in USA
- RFID SHIELDED - Protect your contactless cards from electronic pickpockets with the industry's best.
- USA Designed, Molded and Assembled - Our slim polycarbonate frame is tough as nails and will last you for years!
- 2 CARD HOLDER - Securely holds one card on each side so both cards are easily displayed.
- LANYARD & REEL INCLUDED - 36 x 3/8" Lanyard with J Hook & Carabiner Retractable Badge Reel.
- ID Stronghold is the original RFID Blocking Company with FIPS 201 Approval for all our ID holders.
- RFID CARD PROTECTION - FIPS 201 Approved RFID ID Badge Blocker - Helps to Prevent Your RFID Card Info From Being Skimmed - Blocks 13.56MHz Radio Frequency Signal
- TWO CARD HOLDER - Open Face, Double Sided - Perfect Solution for Holding 2 Proximity Cards, Credit Cards, Work ID, DOD, TWIC, PIV, Government and Military CAC
- VERTICAL OR HORIZONTAL DISPLAY - Hard Plastic Slot Hole for Portrait or Landscape Hold - Attaches Well with Vinyl Strap Clip or Plastic Clips - Hang from Lanyard or Badge Reel
- STURDY AND SECURE - Allows Cards to Slide from the Top or Bottom on Either Side - Won't Scratch Barcodes on Card - Cards Remove Easily and Snap Back in Place
- REMOVE CARD TO SCAN - Cards Must Be Removed From Holder to Scan - Can Partially Slide Card Chip End for Card Reading Access at Security Checkpoint
- DESIGNED AND ENGINEERED BY GOVO IN OHIO, USA
- DURABLE AND LIGHT WEIGHT: The holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. Weights 1.4 oz.
- PATENTED CLIP: The first and only badge holder with a metal clip allow you to carry your ID on your belt, pocket, key chain, backpack or a lanyard. The opening on top of the clip is designed for connecting to lanyard or carabiner. The clip is made from manganese steel making it strong and durable.
- PATENTED SPRING-LOADED CARD HOLDING SYSTEM: It holds cards well no matter it is loaded with 1 card or 4 cards. The spring holds cards on the sides so it won’t damage your cards or let them slip out. Unlike plastic retainer, metal spring does not lose elasticity.
- DOUBLES AS A WALLET: The GOVO T4 can be used as a wallet thanks to its’ 4 cards capacity. You can carry your credit cards, driver license and work ID all in one in this compact holder. The steel clip can also be used as a cash clip.
- ▶ Dimension: Heavy duty badge holder size (W x L): 2.5 x 3.4 inch, card slot size (W x L): 2 x 3.4 inch, 5 mm in thickness. Retractable badge Reel Size: 2 1/8 inch (l) x 1 3/8 inch (w). Retractable cord, 23.6 inch cord extension.
- ▶ Material: this id card holder made of frosted plastic to prevent glare off of your photo ID badge and from scratches. Perfect for Office Keycards, Smart PIV, CAC, and All Standard 8030 Proxy Cards (Drivers License / Credit Card Size).
- ▶ Features: thumb notches on both sides make it easy to remove ID card from the badge holder, vertical top-load format keeps your badge from loss.
- ▶ Usage: slot hole on back for easy attachment to badge reels, lanyards, strap clip, etc. Vertical id holders accommodates 2 cards for you.
- ▶What you get : 3 packs id card badge holders in a bag, each one can hold at least 2 cards.
- Easy Access : Red Extractor Slide for Easy Card Removal from the Badge holder
- Sturdy and Durable : The Identification Badge Holder material is Hard Plastic avoid from broken to prevent glare off of your photo ID badge and from scratches
- Hold 1 ID Badge :Ideal for office key cards, smart PIV, CAC, and all standard 8030 proxy cards (drivers license/ credit card size) ,(L x W) 3.370"x 2.125" (85.6mmx53.98mm)
- Classic Vertical Layout : Top load slot hole on back for easy attachment to badge reels, lanyards, Alligator Clip, etc
- Frosted Clear Front : Red "Easy Access" Tab on Back
- RIGID & RUGGED POLYCARBONATE PLASTIC - Hard Plastic Vertical Format I.D. Badgeholder with Heavy Duty Safety Break Away Neck Cord Lanyard - Protect Your Valuable Access, CAC, PIV, TWIC or Government Employee Name Badge from Damage and Loss
- TOP LOADING & FULLY ENCLOSED FOR 2 - 3 CARDS - All Cards Load from Top of Sturdy Rigid Case (Can Hold 3 Standard CR80 30 Credit / Drivers License Sized Badges)
- CLEAR FRONT WINDOW - Front Badge Has Visible Display for Picture ID’s , Dual Thumb Lever on the Back Can Slide up Smart Chip Cards or Swipe & RFID Prox Access Cardbadges
- QUICK RELEASE LANYARD with SAFETY BREAKAWAY CLASP - Features a Detachable Keychain with Metal Badge Clip - Carries Your Work Badges and Keys
- CARRY ALL YOUR CARDS IN ONE HOLDER - Tough Multi-Card Protector Holds Common Access SmartCards and Proxy Key-cards in One Case - Perfect for When Needed on a Regular Basis (FAA, Port Authority, Security Access, TSA, Military, Customs, and Department of Homeland Security)
- WON’T DAMAGE YOUR RFID CARDS - Perfect for Holding Cards that Can Not Be Punched Due to The Complex Inner Circuitry Including Common Access and Memory Cards
- CRYSTAL CLEAR POLYCARBONATE - Unlike Silicone or Most Rigid Plastic Grip Holders, This Allows Unobstructed View of Your ID
- MADE FOR SMART CHIP INSERT CARDS - Or any Badge You Insert Into a Reader for Access or Payment Transaction
- SUPER STRONG GRIP- By Popular Request, We’ve Designed a New and Innovative Inset Card Holder with Reinforced Prongs and HEAVY DUTY Poly-carbonate Plastic that Grabs Hard and Holds Strong
- NO MORE LEAVING YOUR LOGIN CARD IN THE READER - Attach to Any Retractable Pull Badge Reel or Lanyard and As an Added Visual Reminder That Your Card Is Still In the Reader. Perfect for Government ID, Smartcards, Chip Credit Cards, TWIC, CAC, DOD, FBI, Memory Card, Hotel Insert Key-Card and More!
- This RFID protection card holder holds one or two cards which are size as standard credit card. This badge holder have RFID blocking function so good choice for all contactless cards due to RFID protection for improving security.
- This RFID blocker badge holder is made by RFID protection material which blocking RFID reading when cards are in the ID card holder. The NFC RFID blocking function improves security level, because it protects your contactless card from unauthorized reading which might be nowadays possible by criminals. That´s why this RFID blocking badge holder is important to use for cards as cac card, twic card HSPD 12 PIV credentials PIV card, smart card, Fed ID card and for personal contactless debit card.
- When you need to present your card to reader, you can easily remove your card from the card holder and put the card back to the holder. You can put one card to both sides of the badge holder so this holds two cards. To other side you can insert and remove the card from the top. To other side you can insert and remove the RFID card sliding from the side. And you can also slide the card about halfway out easily with one hand when you need present the card to the access control door reader.
- This RFID safe badge holder is GSA FIPS 201 Approved.
- This RFID blocker badge holder is compatible also with the ReelStrap which is very useful adjustable retractable lanyard ID holder. Together the ReelStrap and the RFID blocking card holder are perfect lanyard badge holder.
You can make certain about the items listed on Mostraturisme.com as these items have been purchased and tried by a great many shoppers. With various options provided we hope you have found the one that will satisfy your needs.
We remember that staying up with the latest is our need; in this way, we keep our site refreshed consistently. Get more info about us through online sources. In case that you feel that the data showed here is deluding or is inaccurate or is superfluous from undeniable realities, at that point kindly don’t stop for a second to connect with us. We will be there for you consistently.
Mostraturisme.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees (at no cost to you) by linking to Amazon.com. Thank you for using our links.