Best Automotive Oscilloscope

Features

• 【Faster sampling speed】FNIRSI DSO152 mini oscilloscope has a real-time sampling rate of 2.5 MS/s and a 200 KHz bandwidth. The 10 x probe can measure up to 800 VPP, which is equivalent to 280 V AC. Voltages up to 400 V can be measured
• 【Professional Designed 】Features with full trigger function (AUTO/Normal/Single). Works perfectly for both periodic analog signals and aperiodic digital signals. 2.8 inch HD LCD display screen, a resolution of 320*240, clear and easy to observe
• 【Portable Mini Oscilloscope】Pocket oscilloscope is an Assembled finished Machine, lightweight and easy to carry, it can be used directly to avoid assembling welding process problems. Applicable to the maintenance industry and R&D education industry
• 【Easy Measuring】Equipped with efficient one-key AUTO setting of all parameters, the measured waveform can be displayed without cumbersome adjustment. Long press the AUTO button to quickly calibrate the baseline,fast measurement of waveforms
• 【Longer Battery Life】Automotive oscilloscope has a built-in 1000 mAh high-quality lithium battery, which can be used continuously for about 4 hours after being fully charged. Type-C interface supports data transmission and charging, firmware upgrade

Features

• Professional Designed: FNIRSI oscilloscope with 1 GSA/S sampling rate and 100 MHZ * 2 bandwidth. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used for both periodic analog signals and aperiodic digital signals
• Highly Performance: 7 inch, 800 * 480 resolution, bright colors, high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module, can tolerate a continuous voltage of up to 400 V. 6000 mAh lithium battery, sustainable use of 4 hours
• Waveform Image Manager: 1 GB storage space can store up to 1000 screenshots 1000 sets of waveform data. Waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning and waveform zooming in, zooming out, moving, etc
• Easily Measuring : Capacitive screen touch & gesture operation, cursor measurement, when manually reading amplitude-frequency parameters, and you can directly get the peak-to-peak value and frequency without reading the background scale unit and quantity
• Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal

Features

• 【Oscilloscope】This dual-channel oscilloscope can measure pulse waves, circular waves, noise waveforms, and more. When dealing with unknown waveforms, the AUTO automatic recognition function can be used. This powerful auxiliary feature varies in recognition time depending on the size and complexity of the waveform, enhancing measurement efficiency
• 【Multimeter】In multimeter mode features 25000 counts and can measure resistance, capacitance, continuity, diodes, and current. Its multifunctional design makes it an ideal tool for electronic measurements, offering high precision and a wide range of applications
• 【High Speed Mode】The ZT-703S oscilloscope offers two operating modes, which can be switched on the fourth page of the menu. In normal mode, it features a sampling rate of 200MSa/s and a maximum measurement bandwidth of 30MHz, consuming less power and being more energy-efficient. In high-speed mode, it has a sampling rate of 280MSa/s and a maximum bandwidth of 50MHz, with higher power consumption. The storage depth is 128K, catering to different usage needs
• 【Signal Generator Mode】In the expanded application mode, the Oscilloscope can store waveform images and activate the signal generator function. It can output sine waves, square waves, triangle waves, and more, with synchronous display in the demonstration window for easy observation and comparison, greatly expanding the device's application range
• 【Charging & Data Transfer】This product uses a Type-C charging port for both charging and data transfer. The Type-C interface supports fast charging and efficient data transfer, making the device more convenient and efficient to use. Due to the multiple functions of this product, please read the user manual before use, and refer to the manual for troubleshooting during use

Features

• 【3in1】Upgraded from 2C23T, FNIRSI 2C53P has combined the functions of 2 channels oscilloscope, digital multimeter and signal generator, but also highly improved its performances in all aspects.
• 【Oscilloscope 】FPGA+MCU+ADC hardware architecture, protects it from overheat and ensures strong capture function. Sampling rate 250MS/s, bandwidth 50Mhz and a built-in high-voltage protection module. Maximum voltage ±400V; supports waveform screenshots.
• 【Multimeter Mode】4 and a half digit 19999 Counts. It could measure both AC and DC voltage, measure the current, capacitance, resistance, diode, continuity, and temperature, etc.
• 【DDS Signal Generator Mode】Output 12 kinds of function signals such as sine, square, triangle, full, half, noise, and DC etc. The maximum output 10MHz. Adjustable frequency, amplitude, and duty cycle.
• 【Accurate Analysis】Excellent analyzation function. It has afterglow, FFT spectrum analysis, cursor measurement, LISSAJOUS graphics display, etc., displaying and analyzing the signal frequency ingredients, and helping you obtain the accuracy of analysis
• 【Large Capacity Battery】 It is 4.3-inch IPS touchscreen tablet with 480*272 ultra high resolution, easy for users to operate. The 4000mAh built-in battery allows you to use it for 4 hours atfer fully charged

Features

• 8-Channel Automotive Oscilloscope: A virtual oscilloscope that combines automotive diagnostic functions, general-purpose oscilloscope functions and a programmable signal generator
• Automotive Diagnostic Functions: More than 80 automotive diagnostic functions (Ignition/Sensor/Bus Detection/Actuator/Starting & Charging, etc.) come standard. Quickly diagnose the stability of automotive systems and make judgements
• Universal Oscilloscope Function: 8 analogue channels, 12 bits resolution, 4K memory depth, 2.4MSa/s real-time sampling rate; 20 automatic measurement modes, can be selected with one key to turn on or off, convenient and intuitive to read the signal measurement results
• Programmable Signal Generator with USB storage: 8 channels, LVTTL output level, 0-250KHz frequency range. Signal generator function to simulate crankshaft and camshaft signals
• The 8-channel automotive oscilloscope is easy to operate and suitable for electricians as well as technicians, hobbyists and electronics enthusiasts to learn basic circuit diagnostics, basic electronic equipment troubleshooting and repair of automobiles, home appliances and other electronic products. Can transfer signals through the USB 2.0 interface, easy to connect to Android devices such as tablets, smart phones and personal computers

Features

• 2 channel oscilloscope multimeter: Upgraded from 2C23T, FNIRSI 2C53P handheld oscilloscope has 250 MS/s sampling rate, 50 Mhz bandwidth. Multimeter 19999 counts, 5 measuring values, max and min display. 4.3-inch IPS touch screen, 480*272 high resolution
• DDS Signal generator: It can output 12 waveforms, the maximum waveform output frequency can reach 10 MHz. FPGA + MCU + ADC hardware structure can ensure a strong waveform capture function. Support waveform preservation, view and export analysis
• Efficiency improvement: Automotive oscilloscope has efficient one-key AUTO, quickly measure, simplify operations. Support automatic/normal/single trigger.Tablet Oscilloscope suitable for periodic analog signals and non -periodic digital signals
• Comprehensive analysis: X-Y mode can be used to compare the phase, amplitude and frequency of two sets of signals. FFT spectrum analysis can estimate the harmonic content and better handle complex signals
• Long-lasting battery life: The digital oscilloscope has a built-in 4000 mAh lithium battery with a battery life of about 4 hours, and supports Type-C interface charging to ensure uninterrupted work

Features

Features

• 【3 in 1】The FNIRSI-2C23T has combined the functions of 2 channels oscilloscope, digital multimeter and signal generator. Handheld and easy to carry. An ideal multi-functional instrument for professionals, factories, schools, enthusiasts, or families
• 【Oscilloscope Mode】2 channel, 10MHz bandwidth, real-time sampling rate 50MSa/s, record depth 32kb, measurement voltage ±400V, automatic measurement, trigger function auto/normal/single, 200mv/div-10v/div vertical sensitivity, waveform storage and export
• 【Multimeter Mode】4-digit 10000 Counts. AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-99.99MΩ, Capacitance: 0-99.99mF, Temperature: -55°C-1300°C/-67~2372℉, Diode, Continuity Measurement
• 【Signal Generator Mode】Waveform output frequency 2MHz and a step of 1Hz，outputs seven waveforms including sine, square, triangle, full, half, noise, and DC. The output frequency, amplitude, and duty cycle are adjustable
• 【Large Capacity Battery】 FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, 2.8-inch 320*240 resolution HD LCD display, built-in rechargeable battery 3000mAH, standby time 6H, Type-C , 5V/1A power adapter charging
• 【DATA storage function】The product is user friendly. There is on-click save and screening function. Those saved images could be uploaded to PC via TYPE C

Features

• Multi touch large screen, resolution up to 800 * 480, friendly and easy-to-use UI, good interaction experience.
• Suspension foot、hands-free：Unique suspension foot design, free hands; It can be used and put at any time. It is anti falling and anti-seismic, sturdy and durable.
• Standard configuration of 4 channel oscilloscope, maximum bandwidth of 110MHz, maximum sampling rate of 250MSa/s, 8M large storage.
• The standard 18W charger supports type-C fast charging, and can also share a set of charging equipment with mobile phones.
• One key waveform storage, convenient and fast.

Features

• 【Upgraded Version】FNIRSI DSO-510 handheld oscilloscope is upgraded from FNIRSI DSO152 oscilloscope, 10 MHz high bandwidth, 48 MS/s high sampling rate, 50 ns-20 S time base range. Voltages up to 400 V can be measured
• 【Accurate measurement】The digital portable oscilloscope supports the level of display and the infinite afterglow, which can accurately capture the signal features. It supports waveform scaling, suspension, movement and image saving and exporting functions
• 【DDS signal generator】FNIRSI DSO-510 can output 13 kinds of waveforms, and the maximum waveform output frequency is up to 50 KHz, which can meet the needs of diversified signal simulation and improve the efficiency of testing and analysis
• 【Professional Designed】Suitable for periodic analog signals and non-periodic digital signals. 2.8-inch HD LCD display, 320*240 resolution, which is clear and easy to observe. The one-key AUTO function can automatically optimize the measurement parameters
• 【Long-lasting battery life】The automotive oscilloscope has a built-in 1000mAh high-quality lithium battery and supports Type-C interface charging to ensure worry-free long-term use