If you have been searching for the best Analog Sensor Ps4, you probably have noticed that not all models have the same specifications, some can adapt better than others to different tasks. To help you choose the product you need, we have gathered 10 of the best Analog Sensor Ps4 from different categories on the market.

Best Analog Sensor Ps4

Image
Product Title
Rating

Our system have put together a list of options that will meet the needs of different types of buyers, so whether it’s price performance or its particular use, we have got you covered for more information on the products we have included links in the list down below which are updated for the best prices.

More Details
3 new from $9.99
Amazon.com

Features

Part Number LA153
Model LA153
Warranty N

  • NOTE:Please test whether the new potentiometer patch has a resistance value before replacing it. If there is no resistance, the white part needs to be removed and installed upside down, and then the resistance needs to be tested. Refer to Figure 2 on the left and install the white parts in two directions. Then test the resistance. If there is no resistance after testing in both directions, it indicates that the potentiometer is damaged. Please contact us.
  • It is normal for the received patch to fall out and can be installed by yourself.
  • Required Ability:Needs moderate soldering. Instruction is not included, but it is not complicated.
  • How to use:Take out the board separately, pry open the potentiometer on the side of the joystick, and replace it with a new one. Fixes Stick drift, blind spots, creeping, stuttering, dead zones, non centered joysticks.
  • Package included:20*modules for games controller joystick

Amazon.com

Features

Part Number E1243

  • Useful:The 3Pin trimmer potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone or wouldn't center after years of wear and tear.Soldering the unit with only 3 prongs will be much more easier than replacing the 14Pin joystick assembly.
  • Used for:The trim pot resistor is OEM repair parts, the same model as the one in your controller. The genuine replacement sensor is to ensure accuracy and prolong lifespan. replacement for the wireless controllers below: PS3; PS4 DualShock4 series (PS4, PS4 Slim, PS4 Pro); Xbox One series (Xbox One, One S, One X and Elite); Nintendo Switch Pro controller.
  • Note:Make sure you have basic soldering skills and some soldering supplies like an electronics solder iron and small gauge solder. Use a pair of pliers to separate the problem sensor off the thumbstick component. A metal pick helps to clear the holes in the PCB. Re-soldering the new unit in is a breeze. Just remember to use flux and keep the iron's tip well tinned.
  • Package include: 12Pcs potentiometer sensor modules for games controller joystick.

Amazon.com

Features

Part Number E354670-E003762458FBA
Color Green
Size 4.5x4.5x2cm

  • Compatibility: Replacement potentiometer sensors are compatible with Xbox One, PS3, PS4, and Switch Pro, restoring accurate and responsive control for gaming enthusiasts
  • Repair Broken Parts: The trim potentiometer sensor solves the problems of creep, jams, blind spots, dead spots, and dead zones. It's perfect potentiometer replacement for your Switch controller
  • High-Quality Material: Made of high-quality ABS and metal material, durable and practical, working exactly like the original controller potentiometer
  • Easy to Repair: Simply take out the board and open the potentiometer of the joystick, then replace it, you can easily do the repair yourself
  • Package Includes: 20 x trimmer potentiometer sensor replacement. The resistance value is 10k ohms, please make sure of this value before ordering

2 new from $5.99
Free shipping
Amazon.com

Features

Part Number hal-p4-yellow
Model hal-p4-yellow

  • Hall Electromagnetic Rocker is Made of High-Quality Wear-Resistant Materials and Hall Sensors to Ensure its Strength and Durability
  • Packaging: 2pcs Yellow Hall Electromagnetic Rocker for PS4 Slim Pro
  • Material:Plastic + Metal
  • The rocker structure is suitable for complex operations, has long-term durability, and avoids the trouble of frequent replacement.
  • The product is manufactured from high-quality materials designed to ensure its durability and long life, which can withstand prolonged reuse

Amazon.com

Features

Part Number 20
Model 20
Warranty N

  • NOTE:Please test whether the new potentiometer patch has a resistance value before replacing it. If there is no resistance, the white part needs to be removed and installed upside down, and then the resistance needs to be tested. Refer to Figure 2 on the left and install the white parts in two directions. Then test the resistance. If there is no resistance after testing in both directions, it indicates that the potentiometer is damaged. Please contact us.
  • It is normal for the received patch to fall out and can be installed by yourself.
  • Required Ability:Needs moderate soldering. Instruction is not included, but it is not complicated.
  • How to use:Take out the board separately, pry open the potentiometer on the side of the joystick, and replace it with a new one. Fixes Stick drift, blind spots, creeping, stuttering, dead zones, non centered joysticks.
  • Package included:25*modules for games controller joystick

Amazon.com

Features

Is Adult Product

  • Brand New , High Quality.
  • Platform: Sony PlayStation 4 .
  • for PS4 Analog 3D Joystick Thumbstick
  • Package Includes: 2 x 3D Joysticks .
  • This 3D Analog Sensor Module is used for fixing your controller.

Amazon.com

Features

Warranty 2 year manufacturer
Color 10 Pack

  • 【Highest Quality】Brand New and Highest Quality, inspected before packaging to ensure that the parts you receive are in good condition.
  • 【Compatible model】Compatible with Sony Playstation 5 PS5 Dualsense / PS4 DualShock Controller.
  • 【Attentions】Soldering is required for this installation,and the installation manual is NOT including in the package.Please searching on Youtube and follow the video step by step.
  • 【What you Get】10 x Potentiometers, 1 x 4.5 inch screwdriver (Phillips #000), 1 x Metal Tweezers, 1 x Spudger, 1 x Nylon Pry Tool, 1 x Metal Triangle Opening Tool, 1 x iParto Microfiber Cleaning Cloth.
  • 【Package】The potentiometers come with a strong outer casing, ensuring that the product will not sustain any damage during transit.

Amazon.com

Features

Model G3646
Color Green

  • Just one screwdriver for calibration (included in the supply)
  • Chip inside, contactless structure, precise control,Compatible with PS4/PS5 controllers , the comfort of using it feels like the original,providing a seamless gaming experience
  • 360° control,Higher Sensitivity Hall Effect Sensor Joystick, which fundamentally solves the problem of joystick drift. PS4/PS5 Joystick also can solve worn, out of control and insensitive analog joystick.
  • Joystick replacement the power is 50% lower than the original carbon film joystick, more power saving, you can get longer game time.
  • Joystick using high quality metal and plastic, sturdy and durable, which can perfectly replace old or broken joysticks. A set of four to ensure that you always have a spare joystick

Amazon.com

Features

Part Number 3Pin-Sensor
Model 3PIN-Sensor
Color ALPS 2.1KΩ Potentiometer
Is Adult Product
Size ALPS 2.1KΩ Potentiometer
Number Of Pages 0

  • [ALPS 2.1KΩ Potentiometer] – The OEM trim pot resistor was made by ALPS. It fits ALPS analog joysticks. This trimmer potentiometer works with PS5 DualSense and some PlayStation 4 DualShock 4 wireless controllers with 2.1K ohm ALPS thumbstick module inside
  • [Compatibility] – ALPS sensors come in two different resistance values. Make sure the value is around 2.1K before ordering. Never judge its value by its color. (Be noticed: Choose 10KΩ version for most PS3, PS4, Xbox One, Elite Series 1 and 2, Xbox Series S|X and Switch Pro controllers. ALPS version is not interchangeable with the orange version made by FU.)
  • [Additional Drift Fix PCB] – Several factors cause joystick drifting a common issue. Even new joysticks can drift. The potentiometer was born without precision. Wear to the carbon film, spring fatigue and material stretching made it not centered. Dust, moisture and drop make it worse. We packed PCB to fix the problem of drifting in one direction. Simply adjust the variable resistor to eliminate the drifting
  • [For most joystick problem] – The potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone, or it wouldn't center after years of wear and tear. De-soldering the unit with only 3Pins will be a lot easier than replacing the entire joystick with as many as 14 prongs
  • [Reminder of Replacement] – Use a pair of pliers to separate the problem sensor off the joystick module. Try to replace the wiper first, see if it works. De-solder the sensor off the PCB. A metal pick helps to clear the holes. Soldering the new unit in is a breeze. Remember to calibrate the new control sticks in settings

4 used from $9.21
Free shipping
Amazon.com

Features

Part Number EL6-ALPS-2.1K
Model EL6-ALPS-2.1K
Color EL6 ALPS 2.1K for PS5 / PS4
Is Adult Product
Size EL6 ALPS 2.1K for PS5 / PS4

  • [EL6 ALPS 2.1K for PS5 and PS4] – 4x replacement analog joystick work with PlayStation 5 DualSense and some PS4 DualShock 4 wireless controllers. The thumbstick module was made by ALPS. This RKJXV stick controller series comes with 2.1KΩ trimmer potentiometers
  • [Compatibility] – We’re listing two ALPS models for PS4 and PS5. The difference is the resistance value of the potentiometers. You can distinguish them from the color of the side plastic. EL1 is 10KΩ in gray, while EL6 is 2.1KΩ in black or green. PS5 controller uses two kinds of joysticks from two different manufacturers. EL6 was made by ALPS, while EL7 was from Favor Union (FU). They’re interchangeable with each other
  • [4x Additional Drift Fix PCB] – Several factors cause joystick drifting a common issue. Even new joysticks can drift. The potentiometer was born without precision. Wear to the carbon film, spring fatigue and material stretching made it not centered. Dust, moisture and drop make it worse. We packed 4x PCB to fix the problem of drifting in one direction. Simply adjust the variable resistor to eliminate the drifting
  • [When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan
  • [Reminder of DIY] – With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. We suggest replacing the potentiometers first to solve most of the joystick problems. If you plan to take off the entire joystick module off PCB, we suggest two methods: 1.Take a look at the desoldering kit at product ID: B0BK7169M8. 2.or you can cut the 14 prongs one by one with a wire cutter