Best Soft Down Lid Support

Features

• STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch.
• EASY TO INSTALL Comes with an exclusive original design installation card, only takes 5 minutes to complete the installation by following the install placement measurement card and installation video.
• 2-WAY INSTALLATION MORINBO hinges can be installed on Top opening or Upward opening lids. They can support lid weight from 5lbs to 10lbs and lower gently; Weight support will be doubled by using 2 lid supports (6lbs-20lbs)
• COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
• KNOW BEFORE PURCHASING Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Each lid hinge can be used for right or left hand mounting.

Features

• LID SUPPORT HINGE--The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required. Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support.
• SOFT CLOSE LID STAY---Every Lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting. Only soft close chest hinges support less than 40lbs, keeping lid hinges at same tension by adjustment will soft closing function work well.
• MAX WEIGHT LID HINGE--Support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
• WIDE APPLICATION--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe.
• EASY TO INSTALL LID SUPPORT --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package.

Features

• Keep your loved ones safe with our Sturdy Lid Stay with Soft Close, designed to prevent slammed fingers and smashed toys or objects.
• Made of premium quality zinc alloy, our heavy-duty hinge can support up to 20lbs/2pcs, making it suitable for a variety of uses including wooden boxes, toy chests, storage trunk & benches.
• Our easy-to-install lid closer can be mounted on the left or right side, and fits most lids with open angles between 90° and 105°, allowing you to keep your lid at any desired angle.
• With the provided template and step-by-step video guide, you can easily find the right screw holes and get the installation done without any fuss. Even if you're not very handy, the process will be straightforward and easy.
• Attention: Please refer to the provided image to ensure proper installation and select the appropriate quantity of Lid Supports based on the width of your lid. Our lid hinges are not suitable for use with hanging cabinets.

Features

• KEEP LID STAY OPEN — The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required.
• DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance.
• EASY TO INSTALL【 Important：Refer to our install videos ! 】 — The lid closer can be mounted on the left or right side, also used for side-mounting and top-mounting. Upward door open adjustable angle of 75°,90°,110°. It can fit for most lids and allow you to keep your lids stay at any angle. Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package！
• ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight. After installing the lid hinges for wooden box, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure, prevent lid from slamming shut.
• CONDITIONED SOFT CLOSING — Only with this chest hinges supporting less than 50lbs and keeping two soft close hinges in same tension by your adjustment will soft closing function work perfectly!! The safety hinges will go down slowly, and prevent fingers from getting smashed.

Features

• STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
• LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
• KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
• COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
• EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.

Features

• STURDY LID STAY WITH SOFT CLOSE: Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. And per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch
• EASY TO INSTALL: Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allowing you to complete the hinge installation easily
• LID STAY SLOW CLOSING: Lid stay support built-in hydraulic dampening device. Doors will come down slowly and softly which eliminates slammed doors or smashed fingers
• COMPACT DESIGN OF LID STAY HINGE allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum angle of 105 degrees
• KEEP LID HINGE STAY OPEN & WIDE USAGE: Easy to follow install instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right

Features

• LID STAY HINGE ROTATE ONE WAY TO HOLD LID OPEN- Soft close hinges will keep your lid open until you push hinge down. Keep the lid stay in place at different angles when the opening angle is larger than 90°. Lid support hinge is suitable for doors of cabinet, toy box, kitchen, wardrobe, storage chest cupboard and so on.
• SOFT CLOSE SAFETY HINGE -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid will slow the descent when the opening angle is less than 70°.
• WEIGHT CAPACITY– 25-50lb Lid support hold 12lbs-22lbs/1pc. 2 hinges support 25-50lbs.
• TOY BOX SOFT CLOSE HINGE--Lid Support Hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. corrosion resistance and anti-rust durable and practical.
• EASY TO INSTALL ONLY 5 MINUTE–Each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions.

Features

• LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
• CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs)
• COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees
• 2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting.
• ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video.
• WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges

Features

Features

• Lid Support Hinge Heavy Duty & Soft Close - The enhanced version has the advantages of strong bearing capacity,maximum Weight of 35 lb. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for cabinet,closet,special overhead kitchen cupboard,wardrobe lids, etc.
• Durable Material - ALL these heavy lid support hinge guarantees high performance: Max-weight 35 lbs when use 2 pc. Made of premium quality zinc alloy and durability the chest slow close hinges guarantee high performance, features corrosion-resistance and more durable use.
• Adjustable Tension Hinges - Our toy box hinges soft close tension are fully adjustable, with Allen wrench to fit for lids with different weight by turning the screw in the middle of the arms to set up appropriate pressure. After installing the lid hinges for wooden box, pls carefully tighten the hinges in the holes to build the proper pressure and prevent the lid from slamming shut.
• Easy to Install - Each heavy duty lid stay hinges can be used for right or left hand mounting,holds the door at any angle you want,upward door open adjustable angle of 75°,90°,110°,Please do ask some one skill in carpentry.The lid support hinge is designed for avoiding slam shut and slam fingers ,you can lift the lid by yourself and hold it up while storing shoes, linens, kitchen hardware or other daily goods.
• Warranty & Service - Value 2-Pieces soft close cabinet hinges with easy install srwes and Allen wrench tool. We ensure that give you a 100% good impression with our slow close cabinet hinges,if you have any question with this hinges for wooden box,pls feel free to contact us, we will reply you within 24 hours.